Oct 11, 2018 at 03:42 pm
Customizable Solar Powered Vehicle Project
Update posted by Stephane JolicoeurESSENTIALS OF THE ELECTRIC VEHICLE
| MOTOR | 1X 3000lbs(1361kgs),153:1(GEAR RATIO) |
| WHEELS HUB | 2X CNC 30MM WHEELS HUB&ADAPTOR |
| CASTER WHEELS | 2X 3INCH STEM CASTER |
| CONTROL BOX | 1X ELECTRIC CONTROL BOX&CABLE |
| control | 1X REMOTE CONTROLLER |
| BEARING | 2X BILLOW BEARING 30MM |
| AXLE | 1X 30MM( 8MM KEYWAY ALONG TOP TO END) |
| Sprocket Carrier | 1X CNC 30mm with 8mm KEYWAY |
| WHEELS | 2X 7 INCH 3 STUD 78MM |
| Chain | 1X 428Pitch With joint link. |
| Driven Sprocket size | 1X 60T #428 pitch |
| Driver Sprocket size | 1X 16T #428 pitch |
14 inch steering wheel
steering column
steering column support bracket
15mm left/right stub axle strut.
2x front gas shocks
2x 3 stud PCD 78MM hubs
adjustable foot control pedal
front tie rod set
