ZAR3,430.00raised of R3,200.00 goal goal
These are challenging and unprecedented times. As the COVID-19 pandemic cases increase by the day, we are running out of medical supplies to fight the disease. At this point we need all the help we can get from everyone that can contribute to the cause.
We are a group of enthusiastic and committed people that believe that can do a small but meaningful impact. That’s why we embarked on the mission of prototyping and making 3D printed face shields for the safety of medical practitioners that are fighting in the name of the community. We cannot join them in the front line but we can definitely help with our valuable collaboration from home.
We hope you can support the cause and help cover the costs for this initiative to Shield our Community. Thanks!
Incubators: Luciana Cooke and German Bodenbender
Main Collaborator: Boogertman and Partners Architects
HOW THE CAMPAIGN WORKS:
The mechanism is simple but yet challenging. We want to prototype as many face shields as we can, but for that we need your help. Our goal is to produce 400, and after initial testings and prototyping we have brought the cost down to R 7,80 per face shield. This means we will like to raise R 3,200.00 to cover the cost to produce the 400 units. To achieve this goal, we have divided the campaign onto five major Milestones:
+ MILESTONE 01 // 50 FACE SHIELDS: ACHIEVED! (Check on the "Updates" section)
Produce the first 50 Face Shields by Wednesday 15 of April. This batch was donated to "Witkoppen Health and Welfare Centre", an NPO located on 105 William Nicol, Fourways. (https://www.witkoppen.org/)
+ MILESTONE 02 // 50 FACE SHIELDS: ACHIEVED!
Second batch of 50 face Shields by Friday 17th of April. This batch was donated to Christ Hani Baragwanath Hospital in Soweto.
+ MILESTONE 03 // 50 FACE SHIELDS:ACHIEVED!
Third batch of 100 face Shields by Monday 20th of April.This batch was donated to Christ Hani Baragwanath Hospital in Soweto.
+ MILESTONE 04 // 100 FACE SHIELDS:ACHIEVED!
Fourth batch of 100 face Shields by Monday 27th of April. This batch was donated to Helen Joseph Hospital.
+ MILESTONE 05 // 50 FACE SHIELDS:ACHIEVED!
Fifth batch of 100 face Shields by Friday 01st of May. This batch was donated to "Witkoppen Health and Welfare Centre"
+ MILESTONE 05 // 50 FACE SHIELDS:ACHIEVED!
Sixth batch of 50 face Shields by Friday 05th of May.This batch was donated to the State ICU Transfers Department.
We are proud to say that we have completed our goal! We are very happy to have been able to contribute towards aiding our health care workers in this hard times!
- German Bodenbender
- Campaign Co Owner
2020/05/05 // MILESTONE 06Update posted by Maria Luciana Carolina Cooke at 09:44 am
Final Milestone Achieved!We donated the final batch to the State ICU Transfers Department.Thanks all for your help and contributions to make this happen!
MILESTONE 03 and 04 ACHIEVED!Update posted by Maria Luciana Carolina Cooke at 06:32 am
2020/05/01 // MILESTONE 04 & 05No better way to honor Workers day than preparing and donating 200 more face shields to two different health centers in need of PPE:Helen Joseph HospitalWitkoppen Health and Welfare CentreThanks all for your helop and contributions to make this happen!
MILESTONE 03: ACHIEVEDUpdate posted by German Bodenbender at 07:42 am
2020/04/28 // MILESTONE 03And the third batch is out. We donated 50 more to the Chris Hani Baragwanath Hospital.Thanks for your support and don't forget to pay a visit to our instagram page for more updates.
MILESTONE 02: ACHIEVEDUpdate posted by German Bodenbender at 08:10 am
2020/04/20 // MILESTONE 02And the second batch is out. We fabricated, prepared and donated the second 50 Face shields to Chris Hani Baragwanath Hospital, the third largest hospital in the word.Thanks for your support and don't forget to pay a visit to our instagram page for more updates.
INCREASE PRODUCTION + TWO MORE PRINTERSUpdate posted by German Bodenbender at 10:11 am
Thanks to the collaboration of Boogertman and Partners Architects, we now have two more 3D printers dedicated to the manufacturing of the Face shields. This is going to not just shared the stress along more printers but also increase the production capacity.
MILESTONE 01 : ACHIEVEDUpdate posted by German Bodenbender at 02:08 pm
2020/04/15 // MILESTONE 01We are really excited to share with all of you that we have achieve our first Milestone and fabricated, prepared and donated the first 50 Face shields already to the Witkoppen Health and Welfare Clinic! Big thanks to all of you that made this possible with your