GEET Life's Launch
CLEAN ENERGY TECHNOLOGY
Here & Ready Now!
Global Environmental Energy Technology
Self-contained and Self-sustaining
Plasma Fuel Reformer
Invented by Mr. Paul Pantone.
Engines fitted with the GEET system
Produce No Pollution
Use around 30% less fuel
Benefit from Reduced servicing intervals
Please help us to document our work so we may continue to the next phase.
I am raising money to have my new exhaust gas emission analyser serviced so that I can finish tuning the current system and document my work.
Myself and the rest of the team have clubbed together to raise the 1000 pounds it cost to buy and ship this equipment but now we need some help to get it ready for use.
Having this equipment fixed will cost around 500 pounds
As soon as this is done I can spend a week or so in my workshop creating a set of videos and supporting documentation. This evidence will then be available for us and the other dealerships as we prepare to move forward under our own power.
Without this evidence we are stuck between a rock and a hard place ... Please help.
I've set the funding request at 3000 as having this amount of money would allow me to eat and attend the various meetings that are due to happen over the next few months.
Dan Easton, GEET Life.
A bit about GEET Life and what we will be doing over the next year:
The public launch of "GEET Life" is the culmination of many years work by founding member Dan Easton, co-founder of GEET Life’s sister company; GEET Australia.
Since 2013 the team have worked very closely with Mr Pantone to develop a clear understanding of how GEET reactors work and have brought forth new equipment for analysing and controlling this amazing system.
Their other guiding mandates are to ensure that the global “GEET Network” is working in full co-operation with one another, to share technological advances and to protect the interests of the collective.
The GEET Life team are now able to demonstrate this equipment and to begin teaching others to fully understand and duplicate a working system. To coordinate the public release of this technology and to represent those who have invested their time, money and effort thus far,
it is important to us that new members feel secure and respected when joining in technical collaboration or financial support with the founding team.
Since the untimely death of Mr. Pantone, GEET Life has been unconditionally providing technical support to the other dealerships as a show of faith in this process.
GEET Life proposes the following course of action;
- Creation of the "International Guild of 5D Engineers."
- The sale of training programmes to share this technology.
- Raise Sponsorship for the
GEET Scholarship Program
for those communities most needing to implement this technology.
The Guild will also act as an umbrella organisation to network and protect not just the GEET Life team, but all inventors or developers of the new emerging technologies. By doing this we hope to create a stable platform encouraging further sharing of new advances and facilitating more people to be involved in the research and development.
Once we have the data we need we will be able to raise the investment to cover the following;
- Premises with accommodation, workshops and classroom space.
- A vehicle to transport equipment / test bed for further development.
- Two more engines with complete reactor sets for teaching class.
- Preparation of lesson plans, documentation and other teaching aids.
Enabling us to organise and sell training courses to further expand the GEET collective and begin financing the GEET Scholarship training programme.
In an ideal world we would love to expand this knowledge base as quickly as possible and to raise money to fund further Research & Development. Until such a time, however, we will continue to work, diligently building upon our current success.
With your help we can achieve our goals
this year instead of 2020
- Teach people how to build working GEET systems.
- Formation of the International Guild of 5D Engineers the 5D Guild.
- Create a scholarship program to fund training classes for community projects.
- Write and distribute training material and class notes for other instructors.
- Provide standardized parts to enable others to reproduce working equipment.
- Finish the development of our diagnostic and engine management systems.
- Release complete GEET converted generators.
- Generate income to fund further research and development.
GEET and other new / clean energy technologies should not be a perpetual drain on our collective resources.
I believe projects like this should be, and will be, capable of funding other less profitable projects or inspired creations. With that in mind I feel that GEET Life should give back something of equal value to that which it receives.
communities want and badly need access to this technology.
To successfully replicate our work they need to come to class.
Simply handing over the information,
without competent training, causes confusion and will do more harm than good.
Even if the fees are kept to the
minimum, allowing us to operate, most communities cannot afford to send a
representative to class.
The donations we received enable us to continue our work. Their value will be accredited to the Scholarship fund. For every £1500 received you, as part of the collective, have paid for a "free" class.
A thank you from us to you personally.
Each backer’s donation will be recorded. Should you purchase any equipment or come to class you will be offered a discount of twice your donation.For donations of £750 you will be offered a class in 2017. (This reservation can
be transferred to another person upon request).
5D Guild "International guild of 5D engineers"
There are 3 camps whose unique needs must be considered and met before any clean energy technology becomes a reality. By forming a guild we gain certain advantages and eliminate many blockages to development.
Agree upon a fair and ethical systems for:
- Exchanging information and providing support
- Pier Review and Accreditation
When Releasing details of new technology for backing, promotion or as finished equipment,
a level of integrity and competence is expected by all parties.
Wish to feel safe and secure when sharing their work with others.
The General public (known as "the collective”) or other investors
need to feel confident that:
- The projects invested in have realistic potential of success.
- There are audited accounts and project managements to each project.
- There is affordable and unrestricted access to the projects once available.
Commercial companies want to build and distribute new technologies:
After the research and development is done there are still large costs involved in commercialising any new technology. It is important to recognise that any company willing to make this level of investment needs to be protected and able to sell the product.
The 5D Guild of Engineers:
Will recognise the effort and industry of its members. It will ensure that they are protected and receive a fair remuneration for their effort. In this way all guild members can be a part of a wider system to continually pay forward and support and benefit from emerging technological advances.
All three parties are trying to protect themselves from parasites.
Other unscrupulous people will try to copy (and rip of all our hard work) without being part of the team.These people are parasites because they have not helped with the development and give nothing back to the inventors, the collective or the manufacturers.