First Induction based (wireless heating) Vaporizer
Fundraising campaign by
Allan Delon Granali
-
US$0.00raised of $5,000.00 goal goal
No more donations are being accepted at this time. Please contact the campaign owner if you would like to discuss further funding opportunities
Campaign Story
A vaporizer that heats your element wirelessly, Small and lightweight you wanted to have is here.
STEALTH1: Introducing, the world's most advanced induction type vaporizer/electronic cigarette that performs with the absence of 510 Positive (+) and Negative (-) output terminals due to intrinsic connection of induction coil which referred usually to as INDUCTION HEATING. Touch controlled operation had been implemented for easy access on settings, power and other adjustments.
Let's make this "wireless heating" vaporizer happen.
A Revolutionary Mod? Absolutely yes! Experience the whole new way of vaping through electromagnetic heating or simply IH and make the future of vaping happen now.
Why use wireless instead of wired or direct connection circuit?
Three words, simplicity, evolution and innovation. Development will always be constant when we talk about vaping technology. From simple battery with a switch connected to an atomizer then came the variable power/voltage and now electromagnetic "wireless heating" without complex winding of coil.
The Project Timeline we had:
August 2015
We had a our plan. Project discussion started.
Preparing of main circuit, schematic and parts to be bought become our main objective.
September 2015
Semiconductor components and different parts where bought from international vendors/suppliers.
Designing of Printed Circuit Board (PCB) started.
October 2015
Components together with semiconductor parts arrived and checking for possible defects where done before mounting.
Mounting happened and testing began.
Numerous test where done. Component failures experienced but expected.
Parts that needs to be replaced and upgraded occurred.
November 2015
Revision of PCB's and parts allocation went on.
Frequent testing on different environments where observed. Passed!
Designing of enclosure started.
December 2015
Final revision of enclosure happened.
January 2016
Finished enclosure and final PCB were assembled.
Another rigorous rounds of testing happened.
Prototype is almost finished.
A new product is confirmed.
February 2016
Product had been posted on numerous vaping groups.
Crowdfunding came to our attention for possible back up and financial assistance.
March 2016
-------------------
Technical Specifications and Features
Induction Based (Wireless Heating)
70W maximum power
Over current protection
Tiny high contrast LCD
Touch controlled operation for settings, power and other adjustments
Can be used with selected stainless steels, High speed steels and ferrous materials
Futuristic and ergonomic design for less hand fatigue operation
Aircraft grade aluminum enclosure
Measures 24 x 54 x 102 mm (L x W x H)
SO WHERE DOES YOUR MONEY GO?
You don't just help the product become a reality but you are also helping us to continue developing new and better products in the future.
It was last year (August 2015) when we decided to design and focus a vaporizer that will revolutionize the way vapers use their mods with a simple push of a button and heats the element via a wireless circuit. Days & months passed and it's becoming a reality now. Although Computer Numerical Control (CNC) Machines which replaces humans to do intricate jobs like enclosure machining (an enclosure example of STEALTH1 as what you see on the actual video and picture), fabricating die moulds, threads, etc. and produces high quality and high quantity aesthetic products with 0.1% marginal error wherein it can do all of what is needed during production, these always comes with a hefty tag. Manufacturing firms don't accept orders in very small quantities, not to mention their initial charge of tool and material cost, consumable down payment and other fees that needs to be settled before a product becomes a reality resulting to consumer whom always pays another set of charge before a unit can be bought at a local store or market. One way to reduce this outlay is to make a projection or have a target production of at least 1,000 units or more, in order for a CNC manufacturing firm to give us a realistic price level.
Another impediment would be the electronic part of the unit. Instruments like Oscilloscopes, Thermal Probe and camera, Signal Generators, Precision Multimeters, Spectrum Analyzers, 3D printing, prototyping and Surface Mount Technology machines are highly needed for the product/unit to become accurate and reliable as much as possible.
We cannot provide all these things by ourselves. We seek your help for us to fully implement our objectives and have the right set of tools for us to have a product to be fully enjoyed by the user and for us to make better products now and also in the future. This will never become a reality without all of you.
Being said, WE NEED YOUR HELP.
Risk and Challenges
Our product will be produced with high quality parts and no inferior components will be included. We are committed to provide you the finest and our top priority is your safety. All products will go thru a quality check before distribution being our primary concern as stated above. Since manufacturing the unit will take time from checking of electronic components to be installed, inspecting the enclosures and it's peripherals for possible defects down to assembling the whole unit, we believe that the best way to keep you informed is by sending an email and facebook weekly notifications before shipping for you to track the status of your order.
Rewards
Little plate cnc machined STEALTH1 logo with your name as donor
Organizer
- Allan Delon Granali
No updates for this campaign just yet