Thank you for taking the time to read our campaign,
Since around June 2017 my partners and i started working on the Project.
Myself and my partners and close friends are all tradesman and between us we have over 40 years’ experience as industrial designers, concept engineering and other fields of practice.
the project has been our focus and been entirely funded by ourselves but unfortunately we can now not proceed any further without your support
How we started our journey.
We started this project as an experiment and was surprised with the small scale results from our first prototype, so much so that we continued to build on it. The technology that we are developing has been around for so long and never utilized in this new approach. We are attempting to make this available on a retail scale for you and everyone around the world at an affordable price.
I know the idea of clean and free energy is almost just a fairy tale but we have seen it and it works.
The project is a mobile device that can be attached to a Petrol (Gasoline) Generator and replace the fuel tank.
The machine is not harmful to the environment, or any persons using it.
We have done the testing and managed to run a 2KWA (at max capacity) generator for 4 hours without using any Petrol (Gasoline). The test was stopped at the 4 hour mark in order for us to test the air quality, generator’s temperature, device performance and so on.
Why we need funding.
We have collectively invested over 4,00 hours of work developing the device, ensuring every detail is as good as it can be, adjusting and fine tuning the electronics side of the machine, drafting of diagrams and plans, testing on an assortment of generators, this is all done after hours at our homes.
Over the course of the project we never kept track of the total cost and material but we calculated with the purchasing of 3 different brand and different size generators, the raw material, electronic components, we have invested well over 200K for this project. And for the final stage we are now out of any further options but to turn to you.
We need to manufacture the final device and have it sent to be tested to get certification, for compliance in accordance for the NRCS Regulation (ICCE Certificates).These test are expensive.
After this is done we expect that there will be requirements that might need adjustment and adjustments cost money. Once everything is in order we can proceed to the production phase of the project. In order to do this at the lowest price possible without compromising on quality we need buying power, if we can buy the materials and components on a large scale we can get a better price which will lower the retail price.
We plan to manufacture 3 different size devices. Each device will be built as modular with the possibility to upgrade or downgrade as needed to suit your generator’s requirements.
The materials used for the device
Stainless steel, Brass, Perspex, Rubber, Nylon, Silicone, Steel and HDPE.
Unfortunately we cannot give an exact date for when the device will be market ready but we are aiming to start production in January 2020 depending on the ICCE certification
Please help us light up the world for free, and as a bonus we will also be saving the environment and spending less money on electricityOur goal is 10,000 USD equals to around R 150,000.00 in order for us to complete this project.