BOATBUILDING the Timber Coast 22
Fundraising campaign by
musher169
-
US$0.00raised of $155.00 goal goal
Campaign Story
I Have listed 155.00$ as the amount I would like to raise but that only will pay for the first sheet of plywood. While I encourage all boating enthusiasts to send their money and labor. There are lots of things that lay around peoples home who never use them. One of my goals during the build of this boat is to network and find items needed for the boat that can be attained for little or nothing in cost. The list of things needed that you or a friend may have laying around is below. Show some spirit and generousity and help me complete this build by helping out. I will be beginning a site shortly showing the progress of the vessel. Thanks for your time and support.
Things needed
anchor light
navagation lights
2 portals
small 12 volt refegerator
vhf radio
2 survival suits
epirb
radar
depth sounder
chart plotter
stero xw weather
wash down pump
20 gallon water tank
dickenson stove
trolling gurdies
internet booster
auto pilot
toilet
transducer
windshield wiper
speakers
steering system
plexigalss
fishing gear
Marine diesel 20-50 hp
anchor winlass
downrigger balls
ice tote
fiberglass cloth
epoxy by the gallon
marine grade plywood
Rails, steps, ropes, pulleys etc.
Anything you can think of can be utilized in construction of this economical troller.
Organizer
- musher169
The build begins
Update posted by musher169 at 09:03 amJust ordered 10 sheets of Aqua-tec to begin building the 9 bulkheads required for the boat. These will be built and glassed along with the stem, stern post, and chines. All the parts needed for the frame up will be made so when framing of the hull begins I have
Where are all the boat builders. Lets support this great little boat!